3M™ VHB™ Tapes

Typical Performance Note: The following technical information and data should be considered

Characteristics representative or typical only and should not be used for specification purposes.

Product Thickness
Family Number Color Inches
4919F Black 0.025 17 (300) 90 (620) 80 (550)
4926 Gray 0.015 12 (210) 95 (655) 90 (620)
4936 (F) Gray 0.025 17 (300) 90 (620) 80 (550)
4941 (F) Gray 0.045 20 (350) 85 (585) 70 (480)
4947F Black 0.045 20 (350) 85 (585) 70 (480)
4956 (F) Gray 0.062 20 (350) 80 (550) 70 (480)
4979F Black 0.062 20 (350) 80 (550) 70 (480)
4991 Gray 0.090 20 (350) 70 (480) 65 (450)
4941
Dynamic Adhesion Performance
90Ї Peel Adhesion
lb/in N/100 mm
Normal Tensile
lb/in kPa
Dynamic Overlap Shear
lb/in kPa
5925 Black 0.025 17 (300) 90 (620) 90 (620)
5952 Black 0.045 20 (350) 90 (620) 80 (550)
5962 Black 0.062 20 (350) 90 (620) 80 (550)
5952
4920 White 0.015 15 (260) 160 (1100) 100 (690)
4929 Black 0.025 20 (350) 160 (1100) 100 (690)
4930 (F) White 0.025 20 (350) 160 (1100) 100 (690)
4949 Black 0.045 25 (440) 140 (970) 80 (550)
4950 White 0.045 25 (440) 140 (970) 80 (550)
4955 White 0.080 20 (350) 95 (655) 70 (480)
4959 (F) White 0.120 20 (350) 75 (520) 55 (380)
4950
4945 White 0.045 25 (440) 140 (970) 80 (550)
4946 White 0.045 25 (440) 140 (970) 80 (550)
4945
4905 Clear 0.020 12 (210) 100 (690) 70 (480)
4910 Clear 0.040 15 (260) 100 (690) 70 (480)
4910
4951 White 0.045 18 (315) 110 (760) 80 (550)
4943F Gray 0.045 20 (350) 85 (585) 70 (480)
4957F Gray 0.062 20 (350) 75 (515) 70 (480)
4951
4932 White 0.025 20 (350) 100 (690) 100 (690)
4952 White 0.045 25 (440) 80 (550) 80 (550)
4952
4611 Dk Gray 0.045 18 (315) 90 (590) 65 (445)
4646 Dk Gray 0.025 15 (250) 100 (690) 80 (550)
4655 Dk Gray 0.062 18 (315) 80 (550) 60 (415)
4611
4618 White 0.025 17 (300) 85 (580) 80 (550)
4622 White 0.045 20 (350) 70 (480) 65 (445)
4624 White 0.062 20 (350) 55 (380) 60 (410)
4622
90Ї Peel Adhesion - Based on ASTM D3330 -To stainless steel, room temperature, jaw speed 12 in/min (305 mm/min). Average force to
remove is measured.
Normal Tensile (T-Block Tensile) - ASTM D-897 - To aluminum, room temperature, 1 in2 (6.45 cm2), jaw speed 2 in/min (50 mm/min.) Peak
force to separate is measured.
Dynamic Overlap Shear - ASTM D-1002 - To stainless steel, room temperature, 1 in2 (6.45 cm2), jaw speed 0.5 in/min (12.7 mm/min.) Peak
force to separate is measured.
2 2
3M™ VHB™ Tapes
XXXXX